3M 2014 - Adaptic Non-Adhering Dressing, 7.6 cm x 40.6 cm, 3" x 16", 36/bx, 6 bx/cs
3M 2014 Adaptic Non-Adhering Dressing
3M Adaptic Non-Adhering Dressing is a primary wound contact layer made of knitted cellulose acetate with a woven mesh structure impregnated with petrolatum emulsion, allowing easy removal whilst minimising pain at dressing change.1 Adaptic Non-Adhering Dressings unique composition helps protect regenerating tissue by minimising wound trauma at dressing change.1 The pore size of Adaptic Non-Adhering Dressing is designed to minimise the pooling of fluid at the wound site and allows the free passage of exudate through the dressing.
Features and Benefits of 3M 2014 Adaptic Non-Adhering Dressing
- Enables fluid transfer to a secondary dressing, reducing the risk of exudate pooling and maceration
- Can be used under compression
- Cuttable
- Available in many sizes
3M 2014 Adaptic Non-Adhering Dressing Specifications
Brands | Adaptic |
HCPCS Code | A6223 |
Overall Length (Metric) | 40.6 cm |
Overall Width (Metric) | 7.6 cm |
User guide of 3M 2014 Adaptic Non-Adhering Dressing
Refer to the instructions for use. Select a size of ADAPTIC Dressing that is larger than the wound. Prepare the wound according to wound management protocol. Ensure skin surrounding the wound is dry. Remove the ADAPTIC Dressing from the box.
- If needed ADAPTIC Dressing may be cut to size with sterile scissors.
- Place ADAPTIC Dressing directly over the wound using surgical tongs or forceps and smooth in place around the wound.
- If more than one piece of ADAPTIC Dressing is required, ensure dressings overlap, to avoid secondary dressing adherence to the wound. Overlap should be minimized to prevent occlusion of holes.
- Cover ADAPTIC Dressing with a secondary dressing such as one from the KERRAFOAM Dressings. Choose the secondary dressing based on the level of exudate.
- Apply any secondary cover or retention/compression bandage.
- Dressing change frequency is dictated by good wound care practice and will depend on the condition of the wound. ADAPTIC Dressing may be left in place for several days depending upon amount of exudate.
3M 2014 Adaptic Non-Adhering Dressing Device Characteristics
| What MRI safety information does the labeling contain? | Labeling does not contain MRI Safety Information |
| Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437): | No |
| Device labeled as "Not made with natural rubber latex": | No |
| For Single-Use: | Yes |
| Prescription Use (Rx): | Yes |
| Over the Counter (OTC): | No |
| Kit: | No |
| Combination Product: | No |
| Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P): | No |
