B Braun 0409-7620-03 - Heparin 0.9% Sodium Chloride Solution, 2 Units/mL, 18 x 500mL - Anticoagulant Infusion for Safe and Controlled Blood Thinning (18/CS)
The B Braun 0409-7620-03 Heparin 0.9% Sodium Chloride Solution is a sterile solution used for anticoagulation therapy, containing 2 units of heparin per mL combined with a 0.9% sodium chloride solution. This infusion solution is designed for intravenous use and is primarily used in hospitals and critical care settings to prevent or treat blood clots during medical procedures, surgeries, or in patients who are at risk of thromboembolic conditions. The product comes in 500mL bags, with 18 bags in a case, making it suitable for continuous or intermittent administration as per medical requirements.
Heparin is an effective anticoagulant that works by inhibiting clotting factors in the blood, reducing the risk of clot formation during and after procedures. The 0.9% sodium chloride in the solution provides hydration and helps maintain the bodys electrolyte balance.
Key Benefits
The B Braun 0409-7620-03 Heparin 0.9% Sodium Chloride Solution offers several important benefits:
- Controlled Anticoagulation: Provides a reliable method for controlling blood clotting with 2 units of heparin per mL, ensuring precise anticoagulation therapy during medical procedures or for patients at risk of thrombosis.
- Sterile and Safe: The solution is pre-sterilized and ready for intravenous infusion, ensuring that it remains free from contaminants and is safe for use.
- 500mL Bags for Convenience: Each 500mL bag provides a sufficient volume for fluid administration, reducing the need for frequent changes during infusion, and is ideal for continuous or intermittent dosing.
- Hydration and Electrolyte Balance: The 0.9% sodium chloride solution ensures that hydration and electrolyte balance are maintained while administering heparin, preventing dehydration and sodium imbalances.
- Versatile Application: Suitable for a wide range of medical scenarios, including surgical procedures, cardiovascular interventions, and the management of thromboembolic disorders.
Compatibility and Applications
The B Braun 0409-7620-03 Heparin 0.9% Sodium Chloride Solution is compatible with most intravenous infusion systems and is ideal for use in:
- Pre-Surgical Anticoagulation: Administered before surgery to prevent blood clot formation, ensuring a safer surgical procedure by reducing the risk of deep vein thrombosis (DVT) and pulmonary embolism (PE).
- Cardiovascular Procedures: Often used in cardiac surgeries or procedures like coronary angiography, where anticoagulation is necessary to prevent clot formation during interventions.
- Critical Care Settings: Used in intensive care units (ICUs) for patients at risk of clotting, such as those on mechanical ventilation or with critical illnesses like sepsis.
- Thrombosis Management: Administered to prevent and treat conditions related to abnormal blood clotting, such as stroke, myocardial infarction, and deep vein thrombosis (DVT).
- Post-Surgical Care: Commonly used post-surgery to reduce the risk of clot formation while patients are immobilized or recovering from trauma.
- Pediatric and Adult Care: Suitable for both pediatric and adult patients, with dosing adjusted to the patient's weight, condition, and treatment plan.
Usage Guidelines
To use the B Braun 0409-7620-03 Heparin 0.9% Sodium Chloride Solution, follow these basic steps:
- Inspect the Solution: Before use, ensure the bag is intact, the solution is clear, and free from visible particles. Discard the bag if any abnormalities are noted.
- Connect to IV Infusion System: Attach the IV tubing to the bags port and ensure all connections are sterile and secure.
- Set Infusion Rate: Administer the solution as prescribed, adjusting the infusion rate to the patient's medical needs and clinical condition.
- Monitor the Patient: Regularly monitor the patients coagulation parameters, such as activated partial thromboplastin time (aPTT), and adjust the heparin infusion as needed to maintain therapeutic levels.
- Dispose After Use: Once the infusion is complete, dispose of the empty bags and any unused solution in accordance with hospital or clinic protocols for medical waste disposal.
- For Detailed Instructions: For further guidance on dosage, administration, and monitoring, refer to the product manual or consult the manufacturers website.
Certifications, Safety Standards, and Regulatory Approvals
The B Braun 0409-7620-03 Heparin 0.9% Sodium Chloride Solution is FDA-approved and meets CE regulations, ensuring it complies with safety and regulatory standards required for intravenous solutions. These certifications confirm the products reliability, safety, and effectiveness for use in anticoagulation therapy.
Comparison with Competitor Products
Compared to other heparin solutions, the B Braun 0409-7620-03 provides a balanced formulation of heparin and sodium chloride in a convenient 500mL PAB container, ensuring ease of use in a variety of clinical environments. The sterile packaging and precise heparin concentration (2 units/mL) ensure consistent, safe, and accurate anticoagulation therapy, making it an ideal choice for continuous infusion or intermittent use in critical care and surgical settings.
Typical User Profile and Application Scenarios
The B Braun 0409-7620-03 Heparin 0.9% Sodium Chloride Solution is typically used by healthcare professionals such as doctors, nurses, and medical technicians in hospitals, surgical centers, critical care units, and emergency departments. It is ideal for patients undergoing surgical procedures, receiving cardiovascular interventions, or requiring long-term anticoagulation therapy.
Best Practices for Use and Maintenance
For optimal performance, ensure that the B Braun 0409-7620-03 Heparin 0.9% Sodium Chloride Solution is administered according to the prescribed guidelines. Monitor the patients coagulation status regularly and adjust the infusion rate based on clinical responses. Always use sterile techniques when connecting the IV tubing and dispose of any unused solution following proper medical waste disposal protocols.
Regulatory and Safety Information
The B Braun 0409-7620-03 Heparin 0.9% Sodium Chloride Solution complies with FDA and CE regulations, ensuring that it meets all necessary safety standards for intravenous anticoagulation solutions. These certifications provide healthcare professionals with confidence in the solutions safety, quality, and effectiveness.
How to Order
To order the B Braun 0409-7620-03 Heparin 0.9% Sodium Chloride Solution, simply add the product to your cart on the CIA Medical website and proceed to checkout. For bulk orders, inquiries about pricing, or more information on the product, please contact CIA Medical customer service at (312) 275-5850 or use the contact form available on the website. Our team is ready to assist with any questions and ensure your order is processed quickly and efficiently.
