BD 305194 - Needle Regular Bevel IM Thin 23gx1-1/2" 100/BX, 10 BX/CS

BD 305194 - Needle Regular Bevel IM Thin 23gx1-1/2" 100/BX, 10 BX/CS

305194 - 23 G BD Needle 1 1/2 in. Thin wall IM, Single use, Sterile

BD HYPODERMIC NEEDLE is sharp, tri-beveled stainless steel needles are with non-coring design. Unique grinding and polishing process enhances the sharpness for ease of penetration. The needles feature universal fit, triple sharpened, sterile and are color coded hubs for easy identification.

• PrecisionGlide stainless-steel needles with translucent, color-coded, polypropylene hubs.
• Can also be sterilized with ethylene oxide (EtO) in their individual, easy-to-peel blister package.
• Thin wall IM, regular bevel.

Types of Needle Walls and Bevels

The Thin Wall needle is thinner than a Regular Wall needle. The inner diameter is bigger without any increase in the outside diameter. For example, a 21 G Thin Wall needle has the same outside diameter as a 21 G Regular Wall, but has the same inner diameter as a 20 G needle. Thin Wall allows the same flow volume as a Regular Wall needle one gauge larger.

305194 Thin Wall

Thin Wall: As shown in the diagram, the thin wall needle has a narrower steel wall, allowing a greater volume of fluid to pass through it. The flow rate is typically equivalent to that of a needle one gauge larger. This is especially important with very thin needles.

305194 Regular bevel

Regular bevel: The most common bevel, used for a vast majority of applications. Typically used for intramuscular and subcutaneous injections

Stainless Steel Needle

Made of stainless steel, which is siliconized to allow easier penetration, thus minimizing patient discomfort. Available in different lengths and gauges to suit individual clinical and patient needs.

BD Conventional Needle & Syringe Color Chart

Device Characteristics

Product Packaging Information