Applied Medical Technology 6-2411-ISOSAF - MINI Classic ENFit Feed Sets & G-JET Gastric ENFit Extension Sets - 24 Inch Straight Connector with Male ENFit & TRN202, 10/BX

Applied Medical Technology 6-2411-ISOSAF - MINI Classic ENFit Feed Sets & G-JET Gastric ENFit Extension Sets - 24 Inch Straight Connector with Male ENFit & TRN202, 10/BX

AMT ENFit Transitional Adapters

AMT's feed sets and device kits now include the AMT Transition Adapters, which are compatible with the new ENFit standard. They will be provided throughout the conversion to ENFit. The transition adapters provide both forward and backward compatibility with ENFit. Additionally, all transition adapters have AMTs unique Glow Green Technology along with a lared wing connection, allowing for better dexterity.

MINI Classic ENFit Feed Sets & G-JET Gastric ENFit Extension Sets

• Less obtrusive and easy to conceal.
• Low Profile design.
• Features the a connection mechanism to minimize feeding set disconnects
• Each set allows for complete range of motion by allowing the extension set to rotate within the feeding port during movement

MINI Classic

The AMT MINI Classic is a Low Profile Balloon Button G-Tube; the predecessor to the MiniONE Balloon Button. It offers many of the same features as the MiniONE, with a couple of key differences. The MINI Classic has a wide variety of feed sets to accommodate our customer needs, most importantly it is NOT directly compatible with the MiniONE feed sets, which offer the Glow Green technology. The MINI Classic feed sets are white and match the color of the device interlock.

• Not compatible with Mic-Key Device
• Not compatible with MiniONE Buttons

The MINI Classic Button users enjoy the comfort of its low profile and soft, flexible bolster.

G-JET Button

Single Patient Use

The adaptor should be cleaned meticulously using hot soapy water before being rinsed thoroughly with clean water and subsequently allowed to air-dry. While no guarantee can be given, the adaptor is expected to last for a period of up to 2 weeks.

What is ENFit?

The International Organization for Standardization (ISO) has created a new standard design for enteral connectors, termed the "ENFit Connector."

These new ENFit Connectors are intended to improve patient safety and to decrease the risk of medical device misconnections. This new connector has been designed to be incompatible with Luer adapters, which are commonly used in IV applications. The ENFit connector will look & secure very similar to a Luer threaded lock system, although the design is larger and thus, incompatible with Luers.

Why ENFit?

ENFit is a patient safety initiative, designed to ensure that feeding tube connectors are incompatible with the connectors for unrelated delivery systems such as trach tubes, IV lines, and catheters. Misconnections involving such medical devices may be relatively rare compared with the number of patients needing tubes or IVs, but such misconnections can have deadly consequences when they do occur.

ENFit is a global initiative that affects end users, manufacturers, and suppliers. The ENFitConnectors were developed as part of the Stay Connected initiative under the supervision of clinicians, manufacturers, and regulators.

What Does This Mean for You?

What is changing is how you connect your food source to the feed set, which in turn connects to an enteral feeding device. The straight or right angle connectors, which attach and lock into low-profile feeding devices, will remain the same. The distal end of feed sets, which connect directly into the device, are not regulated at this time.

Device Characteristics