C.R. Bard 7617400 - Single Lumen Groshong NXT ClearVue PICC, 4 Fr, Full Nursing Tray w/o Microintroducer, 5/CS

Part Number C.R. Bard 7617400

SKU Number CIA2626623

Sell Unit CASE

Ships Within Special Order

List Price $1,271.34

Qty:

Add to Cart

Product Description

C.R. Bard 7617400 - Single Lumen Groshong NXT ClearVue PICC, 4 Fr, Full Nursing Tray w/o Microintroducer, 5/CS

C.R. Bard 7617400 Single Lumen Groshong NXT ClearVue PICC

Proximal Luer Connector.
Anti-Kink Sleeve.
Proximal Luer Connector.
Catheter with Radiopaque Stripe Material: Silicone Rubber
Oversleeve Portion of Connector,
Three-Way Groshong Valve
Tip Plug Rounded Radiopaque Atraumatic Tip

Catalog No.	Tray Configuration	Gravity Flow (ml/hr)
7617400	Full Nursing Tray w/o Microintroducer	540

Priming Volume (ml)	Gauge	Equal ID (in)
0.45	18	0.033

C.R. Bard 7617400 Single Lumen Groshong NXT ClearVue PICC Connector Assembly Procedure

Attach Connector to Single Lumen Catheters

Retrieve the oversleeve portion of the connector and advance it over the end of the catheter. If you feel some resistance while advancing the oversleeve, gently twist back and forth or spin to ease its passage over the catheter.
Gently advance the catheter onto the connector blunt until it butts up against the colored plastic body. The catheter should lie flat on the blunt without any kinks.
With a straight motion, slide the oversleeve portion of the connector and the StatLock compatible connector with extension leg together, aligning the grooves on the oversleeve portion of the connector with the barbs on the StatLock compatible connector and extension leg. Do not twist.
Note: Connector portions must be gripped on plastic areas for proper assembly. Do not grip on distal portion of oversleeve.
Advance completely until the connector barbs are fully attached. A tactile, locking sensation will confirm that the two pieces are properly engaged. There may be a small gap between the oversleeve and the StatLock compatible connector with extension leg.

Suggested C.R. Bard 7617400 Single Lumen Groshong NXT ClearVue PICC Maintenance

The catheter should be maintained in accordance with standard hospital protocols. Suggested catheter maintenance is as follows:

Dressing Changes

Assess the dressing in the first 24 hours for accumulation of blood, fluid or moisture beneath the dressing. During all dressing changes, assess the external length of the catheter to determine if migration of the catheter has occurred. Periodically confirm patency and security of dressing.

Flushing

For intermittent use, flush the catheter with saline after each use or at least once each week or after each use. Note: When infusion volume is a concern in small or pediatric patients, flush with 3 mL per lumen. Caution: To reduce potential for blood backflow into the catheter tip, always remove needles or needleless caps slowly while injecting the last 0.5 mL of saline.

Occluded or Partially Occluded Catheter

Catheters that present resistance to flushing and aspiration may be partially or completely occluded. Do not flush against resistance. If the lumen will neither flush nor aspirate and it has been determined that the catheter is occluded with blood, a declotting procedure per institution protocol may be appropriate.

Device Characteristics of C.R. Bard 7617400 Single Lumen Groshong NXT ClearVue PICC

What MRI safety information does the labeling contain?	Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437):	No
Device labeled as "Not made with natural rubber latex":	Yes
For Single-Use:	Yes
Prescription Use (Rx):	Yes
Over the Counter (OTC):	No
Kit:	Yes
Combination Product:	Yes
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P):	No