Product Description
Deroyal 81-101400 - Temperature Probe Interface Cables, Monitors requiring YSI 400 Series type thermistor sensor, 1/CS
Deroyal 81-101400 Temperature Probe Interface Cables, Monitors requiring YSI 400 Series type thermistor sensor
DeRoyal offers an extensive range of adult and neonatal temperature monitoring products. The DeRoyal adult temperature monitoring system works with most multifunctional physiological monitors and anesthesia machines. The system includes a variety of probes and sensors which allow clinicians the flexibility to customize treatment based on their preferences.
- Length: 12 ft (3.6 m)
- Packaged 1/box
- Reusable
- Not made with natural rubber latex
- DEHP Free
- Non-sterile
Intended Use of Deroyal 81-101400 Temperature Probe Interface Cables, Monitors requiring YSI 400 Series type thermistor sensor
The DeRoyal Interface Cable is a reusable interface cable for use only with disposable temperature probes.
Directions for Use Deroyal 81-101400 Temperature Probe Interface Cables, Monitors requiring YSI 400 Series type thermistor sensor
- Connect the Interface Cable into the appropriate monitor jack.
- Connect a disposable temperature probe to the cable.
- Refer to the instruction sheet insert found inside the disposable temperature probe boxes for SUGGESTED DIRECTIONS FOR USE.
- After use with probe, disconnect from probe by pulling the two connectors apart. DO NOT pull on the cable lead wire while attempting to disconnect. Avoid crushing the cable lead wire or connector.
- Follow facility approved protocol for cleaning of the cable. If cable is damaged, dispose of according to facility protocol.
Deroyal 81-101400 Temperature Probe Interface Cables, Monitors requiring YSI 400 Series type thermistor sensor Cleaning and/or Maintenance
- DO NOT autoclave the cable or gas sterilize if temperature will exceed 60 degrees C (140 degrees F).
- DO NOT immerse the cable in liquids for cleaning. If necessary, clean the cable by wiping it using a cloth moistened with mild detergent.
Device Characteristics of Deroyal 81-101400 Temperature Probe Interface Cables, Monitors requiring YSI 400 Series type thermistor sensor
| What MRI safety information does the labeling contain? | Labeling does not contain MRI Safety Information |
| Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437): | No |
| Device labeled as "Not made with natural rubber latex": | Yes |
| For Single-Use: | No |
| Prescription Use (Rx): | No |
| Over the Counter (OTC): | Yes |
| Kit: | No |
| Combination Product: | No |
| Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P): | No |
Related Products
Deroyal #81-101700, Temperature Probe Interface Cables, Monitors requiring YSI 400 Series type thermistor sensor, 1/CS
Deroyal #81-101400, Temperature Interface Cables,Monitors (Except Hewlett Packard) Requiring YSI 400 Series Type Thermistor Sensor Using Female Pins, Each
