Deroyal M112B-M - Criss-Cross Vest with Waist Loop, White Poly, Medium, QR Buckles, Each
Deroyal M112B-M Criss-Cross Vest with Waist Loop Features and Benefits
- Easy to clean poly or soft cotton construction
- Criss-cross design allows for easy size adjustment for comfortable fit
- Vests with shoulder loops come with optional straps to secure shoulder loops to the portion of the head of the bed that moves with the patient
- Straps attach with quick-release (QR) ties or buckles
- Color-coded binding for easy size identification
Intended Use
DeRoyal Vests are is intended to be used as a physical reminder for the patient to remain in the bed or wheelchair and for postural support.
Contraindications
- Do not use on a patient who is or may become highly aggressive or agitated.
- Never use on a patient if an I.V. or wound site could be compromised by the device.
Vest Sizing Chart
Deroyal M112B-M Instructions for Use
- Place the patients arms through the sleeves or sleeve openings. NOTE: Patient should be sitting up while vest is being applied.
- Secure zipper or hook and loop closure in back. NOTE: Do not overtighten. Two fingers should fit between the device and the patient to ensure circulation is not compromised.
- Secure the straps to the portion of the bed frame or the wheelchair that moves with the patient using quick-release ties or quick-release buckles. Please refer to the instructions below.
Shoulder Strap Application (Not Available On All Styles)
If applying shoulder straps, take the end of the strap and feed it through the loop located on the shoulder portion of the vest. Feed the end of the strap up and over through the teeth of the buckle. Pull the strap completely through until it engages the buckle. Apply the other shoulder strap following the same instructions. Apply the straps to a portion of the head of the bed that moves with the patient using quick-release ties. Follow the quick-release ties application instructions below.
Quick-Release Ties
Wrap the strap(s) around the anchor once. Take the loose end of the strap(s) and create a loop. Cross the loop over the other strap(s) that is wrapped around the anchor and feed it through opening as if tying a shoelace. Hold that loop and create another loop with the loose strap(s) and feed it through the first loop. Pull the final loop and the strap(s) attached to the cuff in opposite directions to form a quick-release tie.
Quick-Release Buckles
Release the female end of the buckle and wrap its strap around the anchor. Pull the female portion through the loop and connect the male and female ends of the buckle. Pull the excess strap to tighten.
